Solid Axle Swap Standard 52 inch Front Leaf Springs for 00-07 Chevy Silverado HD / GMC Sierra HD 8 Lug Trucks
We designed our 52 inch springs specifically for our SAS or SAC (Solid Axle Swap or Solid Axle Conversion) kit to replace your IFS (Independent Front Suspension) with a far more durable solid axle setup. These sprigs are made to our specs by Atlas Spring.
The final ride height of your truck depends on other bolt-on accessories you may have like heavy aftermarket bumpers, winches, etc, as well as the shocks you choose. Here are a couple of examples for you:
- Roughly 5 inches of lift - When using these springs mounted on the top of a Dana 60 or Dana 44 axle and used with our 36.5 inch Spring Mount kit, these springs will increase your trucks ride height by roughly 5 inches and yield roughly 7 inches of total usable wheel travel depending on the shocks you choose.
- We do not recommend mouting these springs under the axle since they will have limited up travel which will result in poor ride quality on the street.
- Many other combinations of springs can be made for the height you desire and we can help you choose the parts or tell you what you need if you want to source them yourself.
These springs are 100% made right here in the USA by Atlas Spring to our specifications
Features and General Specifications:
- Front ride height is roughly + 5 inches over stock when used with the 36.5 inch spring center SAS mount kit and mounted as described
- Roughly 7 inches of usable wheel travel depending on which way they are mounted and the shocks used
- 52 inch spring length for great ride
- Made with Berlin style spring eyes
- 2.5 inch wide leafs
- 3 inch wide OEM style rubber bushings for long life and squeek free performance
- Military wrap of second leaf on front eyes for safety and durability
- Sleeved for 9/16 inch bolts for the ultimate in strength
Notes:
- These springs are VERY large and heavy so they are shipped truck freight which will add additional charges
READ FULL DETAILS HERE
IMPORTANT INFORMATION AND DISCLAIMERS
It is the sole responsibility of the installer, purchaser, and end user (collectively, hereinafter "Buyer") of any product to verify the legal use of any product and to employ the correct installation techniques to ensure proper function of the product as well as use of the vehicle within the constraints of all applicable laws and the constraints of the original vehicle design or by making sufficient modifications to the vehicle to support the product being installed. Performance Group LLC, it's directors, officers, members, employees, agents, representatives, successors, affiliates, assigns, and/or volunteers (collectively, hereinafter "Seller") are not liable for damages of any kind for any reason, and hold no liability for any product failure for any reason, including possible fines for illegal or improper product use or installation. The Seller makes no claims or representations and offers no certification or warranty of legal use of any product for the Buyer's application.
EMISSIONS WARNING
Some Products sold by the Seller are Intended for Legally Sanctioned, Organized Competition and Race Use Only and may not be legal for use on any registered vehicle in the United States. Some Products are not legal for sale or use in the state of CA, or states adopting CARB standards, on any emissions controlled vehicle unless the product has a CARB EO # or the product classification is specifically exempted by CARB.
PRIOR TO PURCHASING THIS PRODUCT, YOU MUST CONSENT TO THE TERMS OF A CUSTOMER NOTIFICATION AND DISCLAIMER OF LIABILITY FORM BY ELECTRONICALLY ACCEPTING SUCH TERMS AT CHECKOUT.
ATTENTION CALIFORNIA RESIDENTS
Proposition 65 WARNING: Some of the products sold by the Seller through this website and other sales channels contain, or may contain, chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. This does not mean that the products sold will necessarily cause cancer or reproductive harm. While the Seller believes that the products they sell are not harmful when used as designed, you should take all necessary precautions to protect yourself such as wearing gloves, appropriate clothing, and respiratory protection when handling the products. Never machine, grind, weld, install, or otherwise modify or operate any of these products without wearing proper protective gear and apparel. You should also exclusively use the product for the intended purpose, don’t handle or work on the product without proper protection and don’t eat, lick, or otherwise put these products into or on your body. We provide these warnings as a result of the California law and for your protection. You can verify the current list of chemicals here: https://oehha.ca.gov/proposition-65/proposition-65-list
PRIOR TO PURCHASING THIS PRODUCT, YOU MUST CONSENT TO THE TERMS OF A CUSTOMER NOTIFICATION AND DISCLAIMER OF LIABILITY FORM BY ELECTRONICALLY ACCEPTING SUCH TERMS AT CHECKOUT.