4-Link control arm kit designed to work perfectly with the 2005-2012 Ford Superduty Dana 60. These links are designed to work with the WFO crossmember or the Speed House Crossmember on 2001-2010 Chevrolet and GMC Gas or Duramax Diesel 2500 and 3500 trucks.
The 4-Link setup is best for anyone running 8 inches or more of lift on the GM Gas or Duramax trucks. A Radius Arm setup is recommended for applications with less than 8 inches of lift due to space constraints and proper fitment.
The 4-link arms are straight and made out of 2 inch x 0.250 inch wall DOM. The large clevis ends on these links will fit directly on the 2005-2012 Ford Superduty Rubber Axle Mounts and will require metric bolts which we have available separately. On the frame side, we include four 1-1/4 inch MetalCloak Duroflex joints to mount into either the WFO crossmember or our crossmember for maximum durability and minimum vibration.
Although the Clevis Ends are fully welded, you are required to weld in the tube inserts! You may also need to cut the DOM tubing down to proper length before you weld in the tube insert to fit your application. These arms ship raw steel and will require painting or coating.
This kit includes:
- 2 - Upper Links / Control Arms
- 2 - Lower Links / Control Arms (link tubing measures 35 inches)
- 4 - MetalCloak Duroflex Joints and Tube inserts
- Grade 8 hardware for the Duroflex Joints
- Bolts for Clevis to Axle NOT INCLUDED but are available separately at additional cost
We also offer the metric bolts (sold separately) to mount the radius arm links to the OEM rubber axle mounts or our mounts for other axles. These are sold as a set of four and include new washers and nylock nuts.
MADE IN THE USA!
WARNING: Welding is required and shortening the tubing may be as well depending on lift height. The tube inserts and torque arm mounts DO NOT come welded in / on.
READ FULL DETAILS HERE
IMPORTANT INFORMATION AND DISCLAIMERS
It is the sole responsibility of the installer, purchaser, and end user (collectively, hereinafter "Buyer") of any product to verify the legal use of any product and to employ the correct installation techniques to ensure proper function of the product as well as use of the vehicle within the constraints of all applicable laws and the constraints of the original vehicle design or by making sufficient modifications to the vehicle to support the product being installed. Performance Group LLC, it's directors, officers, members, employees, agents, representatives, successors, affiliates, assigns, and/or volunteers (collectively, hereinafter "Seller") are not liable for damages of any kind for any reason, and hold no liability for any product failure for any reason, including possible fines for illegal or improper product use or installation. The Seller makes no claims or representations and offers no certification or warranty of legal use of any product for the Buyer's application.
EMISSIONS WARNING
Some Products sold by the Seller are Intended for Legally Sanctioned, Organized Competition and Race Use Only and may not be legal for use on any registered vehicle in the United States. Some Products are not legal for sale or use in the state of CA, or states adopting CARB standards, on any emissions controlled vehicle unless the product has a CARB EO # or the product classification is specifically exempted by CARB.
PRIOR TO PURCHASING THIS PRODUCT, YOU MUST CONSENT TO THE TERMS OF A CUSTOMER NOTIFICATION AND DISCLAIMER OF LIABILITY FORM BY ELECTRONICALLY ACCEPTING SUCH TERMS AT CHECKOUT.
ATTENTION CALIFORNIA RESIDENTS
Proposition 65 WARNING: Some of the products sold by the Seller through this website and other sales channels contain, or may contain, chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. This does not mean that the products sold will necessarily cause cancer or reproductive harm. While the Seller believes that the products they sell are not harmful when used as designed, you should take all necessary precautions to protect yourself such as wearing gloves, appropriate clothing, and respiratory protection when handling the products. Never machine, grind, weld, install, or otherwise modify or operate any of these products without wearing proper protective gear and apparel. You should also exclusively use the product for the intended purpose, don’t handle or work on the product without proper protection and don’t eat, lick, or otherwise put these products into or on your body. We provide these warnings as a result of the California law and for your protection. You can verify the current list of chemicals here: https://oehha.ca.gov/proposition-65/proposition-65-list
PRIOR TO PURCHASING THIS PRODUCT, YOU MUST CONSENT TO THE TERMS OF A CUSTOMER NOTIFICATION AND DISCLAIMER OF LIABILITY FORM BY ELECTRONICALLY ACCEPTING SUCH TERMS AT CHECKOUT.